Home > 제품 상세보기

제품 상세보기

상품명
30 Position Shear Test Oven
설명
Get unmatched results when performing heat-fail temperature shear testing of hot melt and pressure sensitive adhesives with the ChemInstruments 30 Position Shear Test Oven. This forced-ventilation shear test oven includes a ramping controller that complies with the SAFT test method ASTM D4498. The variability of SAFT tests depends on the mass in the oven, specific heat factors, wattage of the heating system, fan speed, program and operator technique.
제품번호
S-O-30

Details

  • 4 segment programmable controller, capable of performing SAFT ramped temperature testing
  • Maximum oven operating temperature of 500°F (260°C)
  • Temperature control accuracy of oven ± 0.5°F at 410°F (1°C at 210°C)
  • Temperature distribution accuracy of oven ± 1.5°F at 500°F (2.8°C at 260°C)
  • Oven is capable of achieving a temperature rise of 2°F (1°C) per minute (dependant on thermal mass)
  • The switch unit of the 30 Bank Shear fills approximately 50% of the interior volume in the oven
  • Stainless steel interior construction of the oven
  • Forced-air circulation type oven (convection)
  • Vent hole in rear of oven for accessory access
  • Easy-open oven door latch minimizes disruption of testing
  • Over-temperature protection and other safety features designed into oven electronics
  • RS-232 serial interface to controller, includes programming and data-logging software
  • 4,000 watt heating capacity
  • Standard oven input voltage - 220 VAC, 3-Phase, (50 Hz)
  • Shears are designed to be used with weights from 100gr to 1000gr
  • Any weight which is larger than the 1000gr requires the S-EXT(Shear Extension) accessory
  • The largest weight that can be safely used with the shear stand is 3000gr
  • Contact us to inquire about the usage of larger than 3000gr weights

Options

  • Viewing window in the door
  • Perforated stainless steel shelves

Specifications

Oven Exterior
 

  • Height:             43" (108 cm)           
  • Width:              47" (119 cm)            
  • Depth:              25" (65 cm)            
  • Weight:             295 lbs (134 Kg)            

 

Oven Interior
 

  • Height:            31" (80 cm)           
  • Width:             40" (104 cm)
  • Depth:            19" (50 cm)

Methods

Some of the more popular test methods that this device is capable of performing.
 

  •     ASTM: D 4498