The most versatile peel tester on the market, the ChemInstruments Adhesion/Release testing machine with digital display is designed to perform PSTC, ASTM, TLMI, FINAT, and AFERA adhesion and release testing procedures.
제품번호
AR-2000
Voltage
120 / 240
Load Cell (lbs)
2 / 5 / 10 / 25
Details
Rugged construction, capable of withstanding the abuse of the production environment
Digital speed control
Selectable speed range from 1 to 1200 ipm (3-3048 cpm)
Test angle is selectable between 90° and 180°
One load cell is included with the machine (2, 5, 10, or 25 pound capacities available)
Capable of pulling up to 25 lb (12 kg) (dependent on selected lower speeds)
Accurate to +/-0.1% of load cell range
Test samples as short as 1/2” to as long as 12” (12-305 mm)
Operating temperature range: 32°-150° F (0°-70° C)
Capable of stand-alone operation with integrated touch screen display
Data can be downloaded to EZ Data software for complete data management
5.7 inch touch screen display
Standard input voltage – 120 VAC (60 Hz)
Data Acquisition System
The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, displays it, and stores the data in its memory.
Samples at 400Hz
Displays graph of all measured force valves upon completion of a test
Displays the average, high, and low measured force results immediately upon completion of a test
Export data by USB connection to a local PC with our EZ-Data software
Displays test values in grams, kilograms, ounces, pounds, or Newtons
EZ Data
EZ Data Compatible Remote setup, operational control, and enhanced data collection are all possible when coupled with our EZ Data management software. This application requires an external PC.
Calibration Service
Calibration Service is available for this equipment. Contact us for more information.
Accessories
Essential:
Test panel – 2” x 6” (50 mm x 150 mm)
Hand roller – 4.5 lb (2 kg)
Specimen tape cutter – 1” (25 mm)
(Above items are all included in our accessory package – ATA.)